Com Sink®

$2,485.00 AUD
Item is in stockHurry! Low inventoryItem is out of stock Item is unavailable
Fitted Soap Dispenser

The Commercial Sink is utilised across all types of  Commercial Food Operations in Australia and NZ - including Food Production/Manufacturing, Warehousing, Food Packaging, Office Settings and On-site Operations.

The Commercial Sink is entirely self-contained (no plumbing required). It draws it's water supply from a 10L, refillable fresh water tank located inside the unit and dispels the waste water into a completely seperate 10L waste water tank also located within the unit.

It is constructed entirely from food grade stainless steel and features an inbuilt splashback, large 11 Litre bowl capacity and options for mains water connections. The unit delivers a timed, 10 second, hot water rinse (40-45°C) and is capable of delivering 50 hand washes per filling. It also has a push button for a cold water rinse.

Ideal for point of need hand washing facilities when the installation of mains plumbing is unable to be attained.

Important: Transplumb recommends you contact your local health authority prior to purchase to ensure compliance with regulations applicable to you. We are unable to offer refunds should your governing body deem our product unsuitable to your application.

Height (bottom to top of tap) 970mm
Height to basin 810 mm

A small 15-20cm gap is recommended from the floor to the base when mounting so that the basin is at standard height for hand washing 90cm - 100cm high, and for cleaning accessibility under the fixture.

Width (left to right) 450mm
Depth (front to back) 300mm
Empty Weight 19kgs.

Bowl Capacity/Dimensions
Height (top to bottom) 150mm
Width (left to right) 385mm
Depth (front to back) 190mm
Capacity 11 L

10 amp, 220/240 VAC power, 2400W (normal household powerpoint).

The Commercial Sink draws next to no power when it is idle, when it is activated, the in-built instantaneous hot water heater and pump operate (for approx 10 seconds) and draw a full 10 amps.

Comes fitted with a standard 2 metre power lead and moulded 10 amp plug.

The Commercial Sink has a dual water reservoir which hygienically separates and stores both fresh and waste water.

The 10 litre capacity will provide up to 50 x ten second hot water hand washes (40/45 degrees) per filling. More than enough for most work areas, spare containers are available for rapid changeover if needed though.

There is a cold water, continuous flow button inside the unit.

The Commercial Sink is designed to give a timed, temperature regulated rinse so as to reduce common errors in performing proper hand hygiene. For this reason the temperature is factory set to 40/45 degrees celsius and cannot be adjusted. Why 40/45 degrees? Because warm water is more likely to encourage hand washing than cold water, most regulations require it, and modern soaps work better with it. The unit has an automatic safety cut off so that water cannot become too hot.

Transplumb Water Technologies reserves the right to make changes in specification without prior notification.

Portable and self-contained sinks, hand wash stations and basins to meet industry regulations and for practical use.


Hot & Cold sinks, no plumbing required.

Self-contained and portable sinks, basins & hand wash stations.

2 Year Warranty

On All Products

Metro & Regional Shippings

Australia Wide Shipping Rates